Shopping Cart
Shopping cart is empty.

Software ECU

Software ECU

  • V4X Plug In Kit
    • V4X Plug In Kit
    • $1,318.18
    • The Wolf V4X is a very cost effective, light-weight and compact engine management system.
      On board 30PSi map sensor (can be upgraded to 45PSi), dedicated boost control.
      3D map tuning every 125 RPM and 16 load points makes this one of the most tunable low cost sytems around.
      The V4X can use most OEM sensors so there is no need to buy extra sensors and has the abialty to have different sensor configuration tables applied.
      With 4 ignition and 4 injection outputs running as true sequential on a 4 cylinder and semi sequental on bigger engines is not a problem.
      With the abilaty to be able to control upto 6 wire idle speed devices and the software to work with it, when using the Wolf V4X there is no reason your project Should no idle as per factory.
      2 x Low side drivers and 4 x high side drivers these can take care of auxilarys such as NOS, VVT and water injection.
      Dedicated Thermo fan output sets up for relable engine temp control.
      Dedicated Low side / high side fuel pump pin with fuel cut off programed in for safty.

      Inputs


      Engine Speed
      Engine Temperature
      Air Temperature
      Throttle Position
      Internal MAP Sensor (Rated to 30 PSI)

      Outputs


      4 Injector Drivers - (Minimum Injector Impedance 0.8 Ohms per output)
      4 Ignition Outputs
      Fuel Pump Control
      Boost Control
      Stepper Motor Idle Speed Control
      PWM Idle Speed Control
      2 Switched Low Side Auxiliary Outputs
      4 Switched High Side / Low Side Auxiliary Outputs

      Features



      1 x Wolf V4X ECU
      1 x Wolf V4X Plug and Play Loom
      1 x Wolf V4X Input Trigger Loom
      1 x PC Software USB
      1 x PC Serial Cable


    • Read More
    • V4X Wire In Kit
    • $1,227.27
    • The Wolf V4X is a very cost effective, light-weight and compact engine management system.

      Inputs:
      Engine Speed
      Vehicle Speed
      Engine Temperature
      Air Temperature
      Throttle Position
      Internal MAP Sensor (Rated to 30 PSI)

      Outputs:
      4 Injector Drivers - (Minimum Injector Impedance 0.8 Ohms per output)
      4 Ignition Outputs
      Fuel Pump Control
      Boost Control
      Stepper Motor Idle Speed Control
      PWM Idle Speed Control
      2 Switched Low Side Auxiliary Outputs
      4 Switched High Side / Low Side Auxiliary Outputs

      Case Size: 118mm x 111mm x 31mm
      ECU Weight: 350g


      The kit contains:
      1 x Wolf V4X ECU
      1 x Wolf V4X Main Loom
      1 x Wolf V4X Input Trigger Loom
      1 x PC Software CD
      1 x PC Serial Cable
      2 x Wolf Sticker

    • Read More
  • V550 Plug In Kit
    • V550 Plug In Kit
    • $2,095.00
    • Welcome to the latest high performance engine management system, with class leading performance and value. Compact, powerful and with the latest features, the V550 offers fifth generation features through sixteen years of research and development. This kit requires the OEM ECU to be removed and the V550 kit to be plugged in. This allows for easy installation of the unit and use of OEM sensors. Take your project to the next level.

      The V550 offers:

      -8 sequential injection
      -8 sequential ignition
      -Having the ability to tune every 125rpm over 16 load points which creates better tuning
      -It has the capability for dual onboard maps which allows for different fuels to be selected by switching between the maps
      -The V550 comes with a 30psi onboard map sensor and can be upgraded to a 45psi map sensor on request
      -Launch control
      -Anti-lag
      -A closed loop quad cam control allows control of the cams in 1 degree increments
      -Dual narrow band O2 sensor inputs can control left and right banks on a V8 or front and rear on an inline motor
      -Self-tune feature (wide band module required)
      -Up to six wire idle speed motor control
      -Fuel pump control (high and low)
      -Closed loop boost control
      -7 dedicated low side auxiliary outputs and inputs and 6 high side auxiliary inputs and outputs (any unused ignition and injection outputs can also be used as low side drivers)
      On top of this, the V550 has the ability to run any project in any format. This can run a single cylinder motorbike to a V12 engine. If you have any queries about if this kit is for your project, please don't hesitate to contact us.

      All of our products are Australian manufactured and designed and include a full life time warranty.


      Kit contents:
      -1x wolf V550 ECU
      -1x wolf V550 plug in loom
      -1x wolf V550 PC Software
      -1x Wolf V550 serial cable
      -1x Life time warranty

    • Read More
    • V550 Wire in Kit
    • $1,895.00
    • Welcome to the latest high performance engine management system, with class leading performance and value. Compact, powerful and with the latest features, the V550 offers fifth generation features through sixteen years of research and development. This unit is designed as a universal wire-in system Take your project to the next level.

      The V550 offers:

      -8 sequential injection
      -8 sequential ignition
      -Having the ability to tune every 125rpm over 16 load points creates better tuning
      -It has the capability for dual onboard maps which allows for different fuels to be selected by switching between the maps
      -The V550 comes with a 30psi onboard map sensor and can be upgraded to a 45psi map sensor on request
      -Launch control
      -Anti-lag
      -A closed loop quad cam control allows control of the cams in 1 degree increments
      -Dual narrow band O2 sensor inputs can control left and right banks on a V8 or front and rear on an inline motor
      -Self-tune feature (wide band module required)
      -Up to six wire idle speed motor control
      -Fuel pump control (high and low)
      -Closed loop boost control
      -Seven dedicated low side auxiliary outputs and inputs and six high side auxiliary inputs and outputs (any unused ignition and injection outputs can also be used as low side drivers)
      On top of this, the V550 has the ability to run any project in any format. This can run a single cylinder motorbike to a V12 engine. If you have any queries about if this kit is for your project, please don't hesitate to contact us.

      All of our products are Australian manufactured and designed and includes a full life time warranty.

      Kit contents:
      - 1x wolf V550 ECU
      -1x wolf v550 flying loom 2.7m long
      -1x wolf v550 trigger loom
      -1x wolf v550 PC Software
      -1x Wolf v550 serial cable
      -1x Life time warranty

    • Read More

Login to Wolf EMS

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×