While E85,E99,E104 is being used more often these days, being able to monitor the ethanol content of the fuel being used is a good idea.
As quality of fuel may vary from manufacturer to manufacturer this can cause your tune to be incorrect for quality of fuel.
This kit allows for connection with the Wolf ECU and allow mapping for the ethanol content.
This unit comes with all sensors and wiring required for fast installation.
Techedge 2J2 Wide band gauge kit, this can be interfaced directly to the Wolf. This product comes with its own gauge for monitoring Air Fuel ratio while
driving, this unit can read A/F or Lambda with a flick of a switch. Inter face this unit to the Wolf for display on the Wolf software, Access self
tune on later Wolf ECUs. The Techedge uses the LSU-4 and LSU 9 sensors for fast and accurate readings. This unit is an affordable unit to enter the
market of tunning. The Gauge has Green digital numbers in the center with a fast indicator around the outside. This unit comes with a 1.9mt long cable
for the external sensor to fit, if longer required this can be supplied (extra cost)
The Wolf EGT convertor, Made to a very high standard of speed and accuracy this
Unit will read your "K" type thermalcouple and convert it to read 0-5V output.
Take control of your tune and monitor your exhaust gas temperatures, with such fuels being used
like E85 and methanol, Exhaust temperature is one of the true ways to maintain a safe and powerful tune.
This output can then be used with your Wolf to datalog or can interface with most
Dataloggers on the market.
4 X K type thermal couples
4 X 0-5v anolog signal (with matching spec sheet)
? Motor Sports
? Power Gen
? Research & Development
? Alternative Energy
The Exhaust Gas Temperature Sensor is specifically designed for use in racing, tuning, and testing applications.
Made in the USA from superior materials. The Exposed Tip sensing junction provides immediate response to dynamic temperature changes.
The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C).
The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications.
The EGT probe is 0.187" diameter (4.75 mm) with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8" NPT compression fitting adapter is included.
The EGT probe cable lead length is 6 feet (1.8 meters).
The probe cable is over-braided in stainless steel for heavy-duty abrasion resistance.
The signal wires are Teflon insulated. Designed to deliver high performance, high temperature measurements, reliably and consistently.
These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts.
The EGT probes can be used for many different applications, including? but not limited to? Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.